Lubricating Way To Convey Chain

  The viscosity of lubricating oil movement is about 20 to 40 under the movement temperature in per second.
  Conveyor chain usually have four types of lubricating in transmission process. They are oil drip lubrication, oil lubrication, brush oil, oil bath lubrication or splash lubrication.
1.Drop the oil on the gap of internal and external chainplate through the oil pipe with oil cup.
2.The pump pressure lubrication supply chain continuously with the pump through the tubing.
Use pot or brush to oil artificial and regularly.
4.Use sealing transmission box to oil bath lubrication or splash lubrication. The former part of the chain and the chain wheel submerged in oil and the latter uses oil pan to splash with large diameter.

You can use oil instead of them only the speed is very slow and can not supply the place. Chain well has been a very important part in many conveyor equipment and transmission equipment. Chain wheel now are mostly used in the foundation of sprocket assembly, tensioning the chain and weight box to adjust the tension of the couplet. The operation and maintenance are all not very trouble because its structure is not very complex. It will operate in accordance with the provisions of the direction when use the sprocket and chain tensioning at the same time. It will not has the condition of swing and the operation is stable and reliable.

How To Prevent Chain Scission

Generally speaking, there are two types of roller chain scission. They are breaking strength and fatigue fracture. Breaking strength means that with large coal, iron and other things clip on the tracks and making the roller chain broken finally. Fatigue fracture means that the roller chain has worked for long time and the its wear resistant coating on the surface fallen off, wear resistance decreased, carrying capacity weakened and the roller chain fatigue fracture.
In case of accident, we must control the quality of roller chain in the processing and  procurement. Regular inspection of the roller chain, find and solve problems. When the roller chain is working, we should standardize work processes. At the same time, we must change the roller chain in time if it necessary. After the roller chain cleaned and oiled. Inverted tooth plate slowly and the chain link could be straightened. If some links still keep an angle, it indicated that the action is smoothly and it also called knot. It must be adjusted. The damaged links must be changed immediately.
You should pay attention to the fair when using chain device. It is not easy to put the thimble warped. Use tools carefully could not only protect the toll but also reach good effect. Otherwise the tool is easily to be damaged and even damage the parts of tool. It is a vicious spiral. Always ensure the chain has some oil.