Influencing Factors To Drive Chain Quality

Drive chain plays an irreplaceable role in modern industry. Drive chain quality is decided by the work efficiency of transmission chain. Next we will tell some factor that affect the drive chain quality.

1.Dissimilar metal combination. For example, industrial transmission chain is formed by the combination of iron and copper, tin, lead and other non ferrous metals.

2.The chains pollution. Such as paint pollution and oil pollution. In general, alkaline degreasing fluid is not easy to remove. It is necessary to use special solvent to remove by incineration and blasting method. Besides removing welding slag is also important.

3.Material of industrial transmission chain. The material will affect hot dip galvanizing coating arrangement and thickness. It can be reduced to the least influence with the exchange of technical advance.

4.Welding method. Industrial transmission chain welded method has great effect on hot dip galvanized steel structure quality. Serious and even lead to split or product deformation.

5.Doubt in description. Industrial chain layout description is the main factor for hot dip galvanizing quality of work.

6.Industrial chain scale size and component. The chain can fully immersed in liquid zinc. It is too long or too wide which need to be divided two dip. The engaged appearance will be rough or too thick.

Notice For Storing Each Chains

People are not very known about the professional words, such as special convoy chain, special-shaped non-standard chain. But mostly people have connected with bicycle chain.

Many people have seen the bicycle chain rust or fall off. It is same as special convoy chain. We must do good chain maintenance to extend the service life of chain and ensure the machine work normally. In fact it is not very complex to do daily chain maintenance. Each type chain has similar maintenance method.
Firstly you should avoid to store the chain at too wet place. Too wet environment will cause the chain oxidation. The chain sprocket is likely to rust if they have been storage for long time. This has effect on product quality and even effect sales.

Secondly don’t put the chains at the place with high temperature or direct sunlight. The product volume will be increased after used for a long time. It is not meet the size requirement and even effect the production application. At the same time, the physical properties of product also have changes.
Finally sprocket chain must be keep far away from the chemical corrosion. Sprocket chain stored close to chemical corrosion is harmful to people health and the chain is easily to be rust. So there will be an effect on product application.